CNC machining and welding

Send the drawing. We make the part.

Turned, milled and welded parts in steel, stainless, aluminium and plastics, from one prototype to a few thousand pieces. A machinist reads every drawing and answers within a working day.

Ask for a price
  • A price within one working day
  • One piece or a few thousand
  • Material certificates on request
  • Delivered, or collected from the shop
An end mill cutting a block of aluminium, chips all round it
Milling aluminium
Turned up to
Ø630 × 2,000 mm
Milled up to
1,000 × 550 × 550 mm
Welded up to
4,000 × 2,000 × 1,500 mm

What we make

  • A CNC lathe with its chip conveyor in a workshop

    CNC turning

    Shafts, bushes, flanges and threads up to Ø630 mm, and from the bar for series.

  • Milled aluminium plates with pockets, slots and bored holes

    CNC milling

    Plates, housings and brackets on three and five axes, up to a metre long.

  • Welding the corner of a steel frame on a welding table

    Welding

    Frames and assemblies in MIG/MAG and TIG, in steel, stainless and aluminium, straightened and ready to paint.

  • A rack of steel tubes and box sections

    Sawing and material

    Bar, tube and profiles cut to length from stock, with the certificate of the melt.

Will your part fit?

Type the size of your part and see which of our machines can make it.

Your part

2 / 2

It fits 2 of our machines.

  • CNC lathe with bar feeder

    Fits
    Lathe
    Ø300 × 600 mm
    Bar
    Ø65 mm
    Live tooling
    Cross holes and flats in one set-up

    Shafts, pins and bushes straight from the bar, running unattended through the night.

  • Large CNC lathe

    Fits
    Lathe
    Ø630 × 2,000 mm
    Chuck
    Ø400 mm, with a steady rest

    Flanges, rollers and long shafts.

  • Vertical machining centre

    Mill
    1,000 × 550 × 550 mm
    Spindle
    12 000 rpm, 30 tools

    Plates, housings and brackets.

  • 5-axis machining centre

    Mill
    650 × 520 × 475 mm
    Table
    Ø500 mm, tilting ±110°

    Complex parts in one clamping, five faces at once.

  • Band saw

    Saw
    360 mm

    Bar, tube and profiles cut to length, mitres to 60°.

  • Welding bay

    Welding
    4,000 × 2,000 × 1,500 mm
    Crane
    2 t

    Two MIG/MAG stations and a pulsed TIG, a 4 m welding table and a crane over it.

Recent work

Parts of the kind that go out of our door every week.

  • The turned and milled parts of a lathe chuck laid out on a bench
    TurningChuck body, jaws and pinions
  • Welding a tube frame for a winch mount
    WeldingWinch mount, tube frame
  • A three-jaw chuck on a lathe spindle
    TurningThree-jaw chuck
  • Welding a steel beam frame, sparks flying
    WeldingBeam frames, MIG

From drawing to delivery

  1. Op. 10

    Send the drawing

    PDF, DXF or STEP, or a photo with the sizes. Tell us the material and how many.

  2. Op. 20

    Price within a day

    A machinist checks it and replies with the price, the lead time and anything that would make it cheaper.

  3. Op. 30

    Material and machining

    We buy the material with its certificate, cut it, and machine or weld the parts.

  4. Op. 40

    Measured before it leaves

    Every first piece is measured; the report comes with the parts if you ask for it.

  5. Op. 50

    Delivered

    By courier or in our own van, or collected from the shop.

A digital caliper reading 133.7 mm
Checked at the bench

Measured, not guessed

Every series starts with a first piece measured against the drawing, and nothing leaves without a check of its critical sizes.

  • Height gauge and micrometers reading to 0.001 mm
  • Thread gauges for metric and inch threads
  • A first-piece report with every series
  • EN 10204 3.1 material certificates on request

Have a drawing?

Send it with the material and the quantity. You get a price within one working day.

Ask for a price